Home energy system · all in one

Energy independence for your home in a single unit

Hybrid inverter, MPPT controller and LiFePO4 storage — one system for outage backup, solar panels and a generator. Capacity grows with your needs.

LA5548JMH

5.5 kW

5.1 kWh storage · 11 kW peak

LA11048JMH

11 kW

11.8 kWh storage · 22 kW peak

  • Expandable capacity
  • Pure sine wave
  • LiFePO4 · up to 10,000 cycles
  • MPPT 90–500 V
  • 10 ms transfer
LA series station: inverter and battery module in one stack

Why all in one

One unit instead of three devices and a tangle of cables

The inverter, solar controller and battery are matched at the factory: nothing to pick, check for compatibility or install separately.

10 ms transfer

When the grid drops, the load moves to the battery faster than a computer can notice. The boiler and the fridge keep running.

Pure sine wave

Powers any appliance — from the fridge and boiler to heating controls and computers — with no hum or overheating.

Solar, grid and generator

MPPT 90–500 V for the panels, 90–280 V input for the grid. During a long outage the battery can be charged from a generator.

Three priorities

Solar, grid or battery — you choose which source goes first. Save on the night-time rate.

10,000 LiFePO4 cycles

More than 10 years of daily cycling at 25 °C. A BMS and a circuit breaker in every module.

Works without internet

Protection and modes live in the station itself. The app shows and configures, but the home stays powered offline.

How it works

Energy comes in from three sides and goes where it is needed

The system keeps balancing generation, storage and consumption, and you choose the scenario.

Solar

up to 5.5 / 11 kW PV

Grid or generator

230 V · 90–280 V

Inverter + MPPT

pure sine · up to 94 % efficiency

LiFePO4 storage

5.1 → 11.8 kWh → more

Home

all loads, 230 V

01

Solar first

In daytime the home runs on the panels, the surplus goes to the battery; the grid is only a backup.

02

Grid first

The battery is kept for outages: a classic UPS with solar top-up.

03

Battery first

Maximum autonomy: charge from solar or at the night rate, use it during the day.

Surplus solar can be exported to the grid under a microgeneration agreement with the utility.

Expandability

Start with what you need. Add more when you need it

Storage capacity is not fixed. 51.2 V battery modules connect in parallel to a running system — no inverter swap, no panel rework, no downtime.

LA11048JMH stack: inverter and two battery modules
LA11048JMH · 23.6 kWh
LA5548JMH stack: inverter and two battery modules
LA5548JMH · 10.2 kWh
  1. Identical modules

    51.2 V LiFePO4 batteries with their own BMS go in parallel; the inverter sees the total capacity.

  2. No downtime

    Expand on site: the inverter and the panel stay, you enter the new capacity in the settings.

  3. More autonomy

    Modules add hours on battery. Need more kilowatts — choose LA11048JMH.

Layout options any combination of inverter and battery modules

11.8 kWh11.8 kWh 11 kW
11.8 kWh 11 kW
5.1 kWh 5.5 kW
5.1 kWh5.1 kWh 5.5 kW
11.8 kWh 5.5 kW

LA5548JMH · 100 Ah module

5.12 kWh per module

How long a typical 1 kW home load runs (fridge, boiler, lights, router):

  • 1 module — ~5 h
  • 2 modules — ~10 h
  • 3 modules — ~15 h

LA11048JMH · 230 Ah module

11.78 kWh per module

The same 1 kW load — a day and more in reserve:

  • 1 module — ~11.5 h
  • 2 modules — ~23 h
  • 3 modules — ~35 h

Estimate at the given average load, discharged to the lower BMS limit, without solar charging. The maximum number of parallel modules and the expansion layout are confirmed when sizing the system.

Specifications

Two models — for a house and for an estate

ParameterLA5548JMHLA11048JMH
Inverter
Rated power5.5 kW11 kW
Peak power11 kW22 kW
Output voltage / waveform230 V ±5 % · pure sine230 V ±5 % · pure sine
Efficiency (max)94 %94 %
Transfer time10 ms (PC) / 30 ms (appliances)10 ms (PC) / 30 ms (appliances)
Self-consumption< 55 W< 80 W
Grid input170–280 V (UPS) · 90–280 V (inv.)170–280 V (UPS) · 90–280 V (inv.)
Frequency in / out50/60 Hz auto · output ±0.1 %50/60 Hz auto · output ±0.1 %
Solar input and charging
Controller typeMPPTMPPT × 2
Max PV power5,500 W2 × 5,500 W
MPPT range90–500 V DC90–500 V DC
Max charge current PV / grid100 A / 80 A150 A / 120 A
Max total charge current100 A150 A
Storage (base module)
Chemistry / voltageLiFePO4 · 51.2 VLiFePO4 · 51.2 V
Module capacity100 Ah · 5,120 Wh230 Ah · 11,776 Wh
Cycle lifeup to 10,000 cycles at 25 °Cup to 10,000 cycles at 25 °C
Charge / cut-off voltage56 V / 42 V56 V / 42 V
Discharge current: cont. / peak (1 min)100 A / 120 A200 A / 230 A
Charge current: rec. / max50 A (0.5C) / 100 A115 A (0.5C) / 200 A
ProtectionBMS + circuit breakerBMS + circuit breaker
Capacity expansionparallel 100 Ah modulesparallel 230 Ah modules
Dimensions and weight
Inverter550×170×450 mm · 13 kg650×260×470 mm · 15 kg
Battery module550×170×450 mm · 55 kg650×260×560 mm · 110 kg

LA5548JMH One form factor — modules stack on top of each other.

LA11048JMH Two MPPT inputs — for two roof orientations.

Specifications are subject to change by the manufacturer.

Brix app

The whole system on your phone

Battery charge, generation and consumption in real time. Switch modes and the backup reserve from the app, and learn about a grid outage before you notice it yourself.

Energy flow

Where every kilowatt goes right now: solar, home, battery, grid.

Grid outage

A push notification when the home switches to battery, with an estimate of how long it lasts.

Modes and reserve

Backup, self-consumption or schedule; how much charge to keep for an outage.

History

Generation, consumption and balance by day, week and month.

Set up in 10 minutes

QR code on the station, Bluetooth and Wi-Fi — no technician needed for setup.

For the whole family

Shared access to the home: everyone sees the station on their own phone.

Sign in to the app

The web version runs in a browser on your phone and computer.

Sizing

We will size the system for your home

Power, capacity and the number of expansion modules — calculated free of charge from your consumption profile.

Already have a station? Sign in to the app